top of page

Kvaser Air Bridge Light HS (CE)

SKU: 00808-3

£730.00

ADD TO CART

QUANTITY

DESCRIPTION
TECH SPECS
DOWNLOADS

Kvaser Air Bridge Light HS is a configuration-free wireless CAN bridge that achieves predictable latency, without sacrificing stability or range. Comprising a preconfigured pair of plug-and-play units to rapidly exchange raw CAN data, the Kvaser Air Bridge Light HS is designed for environments or situations that make wired connection unsuitable or challenging e.g. between two moving parts that are connected by CAN.

Major Features 
 

  • ​​​​​​8000 messages per second, each time-stamped with 100 microsecond accuracy

  • Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers

  • High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s.

  • Galvanic isolation, previously a more expensive option on Kvaser's original Leaf Light, now comes as standard on the Leaf Light v2, enhancing protection from power surges or electrical shocks.

  • Low current consumption (90 mA) reduces power drain from your laptop.

  • Local buffering and preprocessing results in high performance and a reduction of time critical tasks for the PC.


There are two versions: Kvaser Air Bridge Light HS (00808-3) is approved for the European Union, while Kvaser Air Bridge Light HS (FCC) (01008-6) complies with US certification. Both share the same functionality but have different radio transmission schemes due to regulatory differences.

M130 Multi-Purpose OpenECU Controller
  • M130 is a multi-purpose gateway and controller. The M130 OpenECU™ is designed for applications that require 4 CAN/CAN-FD channels and a small controller. Intended applications include CAN-to-CAN message forwarding, LIN-to-CAN message translation, and sensor-to-CAN data broadcasting. The M130 can whitelist specific IDs to shield one CAN bus from unwanted CAN messages on a different bus, for data protection purposes. The M130 can also be used to modify the CAN messages from one bus before transmitting them on the other bus. Using the two LIN channels and the six analog inputs, the M130 can also broadcast smart sensor data to any of its four CAN buses.

Capabilities
  • Advanced 32-Bit NXP Microprocessor
    • SPC5746B80 MHz
    • Up to 3MB code space
    • Up to 256kB RAM space
    • Up to 256kB Calibration space
  • 4 high speed CAN 2.0B/ CAN-FD channels
  • Wake on CAN (CANA)
  • 2 LIN channels
  • Ignition Input
  • Total of 6 Analog/Digital inputs
  • 2 RTD capable analog inputs
  • Software configurable delayed power off
  • 2 Analog voltage output channels
  • 1 5V 200mA sensor power supply output
 

M130 Multi-Purpose OpenECU Controller

SKU: M130
£1,000.00Price

OpenECU Volume Discounts

Quantity

Applications

  • CAN Gateway Module
  • CAN to LIN Gateway
  • CAN I/O Expansion Box
  • Smart Relay Driver
  • Embedded System Control and Supervisor
  • Alternative Fuel System Controller
Companion Products

Companion Products

bottom of page